Aquator Jumbo Filter for Home Water Purification is installed after the upper tank and pump for the roof of the house.
The Jumbo Aquator filter purifies and filters water in three stages from any impurities such as chlorine, rust and dirt, for completely clean water for bathing, washing and home use.
An inlet and outlet hole with a head made of polyethylene. The inlet direction must be followed as shown on the filter so that the stages perform their functions and are not damaged.
Equipped with an air vent valve.
It can withstand temperatures from 5 to 55 degrees Celsius.
Withstands water pressure up to 10 bar
Warranty: 2 years.
Purification stages:
The third stage acts as a confirmation stage for the first and second stages and confirms the removal of all impurities from the water to ensure pure water via the cotton impurity candle.
The second stage removes the remaining contents of the first stage, in addition to removing chlorine, color, taste and odor of the water.
The first stage removes impurities and suspended particles in the water that can be seen with the naked eye, such as rust, dust and sand, through a cotton impurity candle.
Main specifications:
The filter contains a clock to measure water pressure. This clock has two main functions: the first is to measure the water pressure inside the filter, and the second is to give an indication of changing the filter candles in case they are clogged when the clock pressure is zero.
It is preferable to install a pump before the filter for better performance.
It is recommended to change all three filters every four months.
The filter only purifies the water, and does not desalinate the water.