Water insulation glue seal broke

Material: Flexible, cementitious monolithic material for superior waterproofing of roofs.

Main specifications:

•   It is flexible
• Reduces the risk of cracking and has the ability to heal small cracks.
• For indoor and outdoor use
• Monomeric substance
• Withstands positive and negative pressure
• Suitable for use in swimming pools
• Used with Guru insulation rolls to seal joints.
• Classified as CM-02-P.
• Safe for contact with drinking water according to Royal Decree No. 140/2003.

How to use:

1. Add water at a rate of 28%-29% of the package weight. Then gradually add the dry product until you reach the desired consistency.
2. Mix mechanically at low speeds until completely homogeneous and should not contain any lumps.
3. Use a brush, trowel, or long-bristled roller to apply the material.
4. When using Guro insulation rolls, the joints must be insulated with Fixer Seal and covered well so that the overlap between the two layers is at least 5 cm.
5. It is recommended to apply two layers of the material, at least 2 mm thick, to achieve the best insulation results.
6. The second layer should be applied perpendicularly to the first layer after 5 hours (at a temperature of 20°C).
7. Please wait 7 days before contacting water or applying any paint.
8. Rulers can be used to erase excess.
9. Compatible with Guru insulation rolls, it is an effective and economical alternative to silicone.

* For more information, please scan the code on the package.

Product weight: 3 kg

Shelf life : 12 months from the date of manufacture under good storage conditions

Country of Origin: Made in Spain

Warning*​​​​You must adhere to the application standards and advice written on the outside of the bag.