DAB Diverton 900A Automatic Submersible Pump

Features :

• Divertron By DAB is a mechanically driven multi-propeller submersible electronic pump for clean water.
• Designed to increase water pressure in homes.
• Rainwater reuse,
• Gardening and irrigation in residential buildings.
• Divertron is ideal for use in rainwater recovery systems.
• Increased water pressure from a cistern or tank, which can be used for example to water gardens.

Main Features

• The built-in electronic board manages the pump start and stop independently according to the system requirements, without the need to install an external controller.
• The electric float prevents the pump from running dry in case of water shortage.
• Easier to install and safer to use.
• Thermal protection against motor overheating.
• The pump is equipped with a starting capacitor (inside a chamber that can be easily accessed without disassembling the pump),
• Non-return valve
• 15m power cable with plug.
• The pump is available with technopolymer with anti-particulate filter.

Pump parts features

• Pump body and impellers are made of technopolymer for corrosion and oxidation resistance. Outlet has a non-return valve and. It has an anti-particle filter.

Warranty: 2 years from the date of receipt

Note:

Highly recommended when using the pump as a booster to pressurize and supply water directly to the whole house.

Why Add a Pressure Tank (18–24 L) to Your Automatic Submersible Pump?

• Protects Your Pump – Reduces frequent ON/OFF cycles so your pump lasts longer.
• Smooth Water Flow – Prevents sudden drops or splashes at taps and showers.
• Saves Energy & Money – Fewer starts mean lower electricity bills and less wear.
• Backup Water Supply – Stores a few liters for small uses or short outages.
• A simple accessory with big benefits: steady water, longer pump life, and real savings.
•  

warning*

Installation Guidelines – Clean Water Submersible Pump

• Use the correct power supply – match voltage and phase to the pump specifications.
• Install in clean water only – avoid muddy or sandy areas.
• Place the pump vertically – ensure the motor is fully submerged.

Do not place the pump directly on the bottom. Keep it about 10–15 cm above the tank or well floor by using bricks, a stand, or by hanging it with a rope or chain. This prevents sand, mud, or dirt from entering the pump and causing blockages or damage.

• Use a rope or chain for lowering – never lift or carry the pump by the power cable.
• Install a Pre-filter– to prevent entry of solid particles.
• Protect electrical connections – keep junctions dry and waterproof.

Country of origin: Hungary.

alert !

- Please do not expose the product to chemicals such as (acid, flash, or dixon..)

- Please clean the product with soft-touch tools and do not use rough tools (such as wire brush or sharp tool) which may cause scratches to the product.