Automatic Submersible Pump HAT-AS-800-3S

Description:

• HATCH AUTOMATIC SUBMERSIBLE PUMP Can Provide Water Flow covers up to 3 floors with 6 taps at a time. 
• The pump has automatic start and stop without the need to install an external controller.
• The pump start and stop system operates based on the opening and closing of taps, significantly contributing to energy savings. 
• When a tap is opened, the pump automatically starts to provide the required water. When the tap is closed, the pump stops, reducing energy consumption and increasing system efficiency. 
• This smart system ensures water and energy savings, enhances the pump’s lifespan, and reduces maintenance costs. 
• It is the ideal solution for homes and Irrigation, seeking sustainability and efficient resource use. 

 Pump Features

• The operation of the pump is controlled by a pressure sensor and flow switch.
• Water Shortage Protection that automatically stops the pump to prevent damage.
• Temperature protection
• Easy Plug-and-Play Design for quick and simple installation.
• Energy-Efficient & Environmentally Friendly design for sustainability.
• Built-in thermal protector.
• SS304 stainless steel outer body to ensure durability and rust resistance.

 Technical Specifications

• Pumped Liquid: Clean water or non-aggressive liquid (free of solids or fiber)
• Rated Voltage: 1× 220–240V
• Frequency: 60 Hz
• P1 Power: 800W (1 hp)
• Current: 4 A
• Insulation Class: F
• Protection Class: IPX8
• Total Head: 35 m
• Max Pressure: 3.5 Bar
• Max. Flow Rate: 100 L/min
• Maximum Submersion Depth: 7 meters
• Max Liquid Temperature: 35 °C
• Outlet Diameter: 1 Inch
• FREE PASSAGE: 1 mm
• Impeller Material: PPO-GF20
• No. of Impeller: 3
• Pump Body: Stainless steel 304
• Shaft: SS420
• Handle: Plastic
• Included cable: 10 meters
• Gross Weight: 11 KG
• Package Dimensions: L260 x W210 x H590 mm
• Model No.: HAT-AS-800-3S
• Color: Stainless Steel / Sky Blue
• Product Weight: ±10.5 KG
• Product Size: 150 x 150 x 535 mm

Warranty: 2 Years

Country of Origin: China

Note:

Highly recommended when using the pump as a booster to pressurize and supply water directly to the whole house.

Why Add a Pressure Tank (18–24 L) to Your Automatic Submersible Pump?

• Protects Your Pump – Reduces frequent ON/OFF cycles so your pump lasts longer.
• Smooth Water Flow – Prevents sudden drops or splashes at taps and showers.
• Saves Energy & Money – Fewer starts mean lower electricity bills and less wear.
• Backup Water Supply – Stores a few liters for small uses or short outages.
• A simple accessory with big benefits: steady water, longer pump life, and real savings.

warning*

Installation Guidelines – Clean Water Submersible Pump

• Use the correct power supply – match voltage and phase to the pump specifications.
• Install in clean water only – avoid muddy or sandy areas.
• Place the pump vertically – ensure the motor is fully submerged.

Do not place the pump directly on the bottom. Keep it about 10–15 cm above the tank or well floor by using bricks, a stand, or by hanging it with a rope or chain. This prevents sand, mud, or dirt from entering the pump and causing blockages or damage.

• Use a rope or chain for lowering – never lift or carry the pump by the power cable.
• Install a Pre-filter– to prevent entry of solid particles.
• Protect electrical connections – keep junctions dry and waterproof.