Automatic Booster Pump for Single Point

Application

The automatic booster pump is used to increase the pressure for single shower or single line.

Suitable to install for single point directly on the supply line to increase pressure.

Very-compact system, ideal for installation in small spaces.

It can also be installed using an old Pipes to create a separate booster system within an apartment.

The pump starts and stops depending on the opening and closing of the taps.

Pump Features

Features:

In systems containing high amounts of impurities and iron. We provide a mesh filter which is recommended to be installed before the pump inlet to prevent these impurities from blocking the flow switch.

Automatically stops in case of water shortage.

The device comes as standard with a 1.5m power supply cable and a Schuko plug for quick installation.

Very quiet, noise level 45dB.

Easy installation and reliable operation.

ENERGY SAVING & MORE EFFICIENCY

QUICK TO INSTALL

HIGH DURABILITY

Technical Information

Pumped Liquid: Clean water or non-aggressive liquid (free of solids or fiber)

Connection: Brass Union

Distance between ports: 200 mm

P1 Power: 300W (0.4 hp)

Current: 1.3 A

Insulation Class: F

Protection Class: IP42

Max Head: 12.5 m

Maximum Pressure: 1.25 Bar

Maximum Flow Rate: 58 L/min

Ambient temperature: 0 ~ 40 °C

Max Liquid Temprature: 90 °C

Inlet & Outlet Dia: 1 Inch

Impeller Material: Plastic

Pump Body: Cast Iron

Included cable: 1.5 meters

Color: Sky Blue

Product weight: +4.5 kg

Product Size: 200 x 130 x 156 mm

Warranty: 2 Years

Package Dimensions: 255 x 165 x 140 mm

Country of Origin: China

Note/Warning

Check that the operating mode selector is set to Off and connect the plug to power source.

Once installation is complete, turn the operating mode selector on "Auto" to allow the unit to operate automatically by starting and stopping the pump when you open or close the tap.

In manual mode, the pump runs continuously. Ensure there is water in the system, at least one tap is open, to prevent the pump from overheating.